SOFT STARTER 3 PHASE 415V 50HZ
DESCRIPTION
The inverter are adapted for use as demonstration or instructional units. The windings of each motor are terminated at 4mm safety sockets on the educational type terminal box or panel to provide efficient and convenient means of connection to external test circuits.
TECHNICAL SPECIFICATION :
1. Input : 415VAC, 3 Phase, 50Hz
2. Power Rating : 5.5kW
3. Panel Control and Indicator:
i. MCCB 15A 3 Pole, main switch
ii. 4mm Safety Socket, AC Output
iii. Pilot Lamp - TRIP
iv. Pilot Lamp - RUN
v. Push Button - STOP
vi. Push Button - START
vii. Contactor Ac
viii. Timer
ix. Over Load Relay
x. 4mm Safety Socket, AC Input
4. Adaptive Motor
i. Squirrel-cage-three-phase asynchronous motor
5. Control Mode
i. Operation panel control
ii. Operation panel + external control
iii. External control
iv. External control + COM control
v. Operation panel + external + COM control
vi. Operation panel + COM control
vii. COM control
viii. No start or stop operation
6. Start Mode
i. Current-limiting start
ii. Voltage ramp start
iii. Kick start + current-limiting start
iv. Kick start + voltage ramp start
v. Current ramp start
vi. Voltage current-limiting double closed-loop start
7. Stop Mode
i. Soft stop
ii. Free stop
8. Protective Function
i. Open loop protection for external instantaneous stop terminals
ii. Over-heat protection for soft starter
iii. Protection for too long starting time
iv. Input open phase protection
v. Output open phase protection
vi. Unbalanced three-phase protection
vii. Starting over current protection
viii. Running overload protection
ix. Under voltage protection for power voltage
x. Protection for fault parameter setting
xi. Load short circuit protection
xii. Auto restart or incorrect wiring protection
xiii. Incorrect wiring protection of external control terminals
9. Ambient
i. Place to be used : indoor location with good ventilation free from corrosive gas and conductive dust
ii. Altitude : below 3000M. It have to rise the rate power when the altitude is more than 3000M
iii. Temperature : -30 + 55°C
iv. Humidity : 90% RH without dew condensation
v. Vibration : <0.5G
10. Structure
i. Protection class : IP20
ii. Cooling pattern : Natural wind cooling
iii. Box Casing
COURSEWARE & ACCESSORIES
· Laboratory Manual
· Instructor’s Guide
COUNTRY OF ORIGIN
Made In Malaysia
WARRANTY
1 Year